Siemens SIPLUSS7-400CPU412 CPU Unit

Manufacturer: Siemens

LEDs indicate internal and external faults and operating modes such RUN, STOP, restart, test function, etc.

The PG can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components.

The PG can be used to provide the user with information about the memory capacity and operating mode of the CPU, and the current utilization of the working and load memories.

More+

Features Applications Model

The low-cost introduction to the mid performance range
Can be used in small and medium-sized plants with requirements in the mid performance range

The CPU 412-1 is the low-cost entry into the medium performance range. It can be used in smaller systems with limited I/O configuration. The combined MPI/DP interface also enables operation of a PROFIBUS DP line.
The CPU 412-2 is the CPU for applications in the mid-performance range with 2 PROFIBUS DP master systems.
For networking within a PROFINET network, the CPU 412-2 PN is available.

Mfr. Part No.	Description
6AG1412-2EK06-2AB0	SIPLUS S7-400 CPU 412-2 PN -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7412-2EK06-0AB0 . CENTRAL PROCESSING UNIT WITH: 1 MB WORKING MEMORY, (0,5 MB CODE, 0,5 MB DATA), INTERFACES: 1. IF MPI/DP 12 MBIT/S (X1), 2. IF ETHERNET/PROFINET (X5), . NOT ALLOWED FOR SAFETY APPLICATIONS

Siemens SIPLUSS7-400CPU412 CPU Unit

Inquiry

Most Searched Keywords