Siemens SIPLUSS7-300CPU315F-2DP CPU Unit

Manufacturer: Siemens

The safety-related and standard communication between the central controller and the distributed stations is performed via PROFIBUS DP. The specially developed PROFIBUS profile PROFIsafe supports the transfer of user data for the safety functions within the standard data message frame. Additional hardware components, e.g. special safety buses are not required. The necessary software is either integrated in the hardware components as an expansion of the operating system or loaded into the CPU later as a certified software block.

More+

Features Applications Model

For configuring a fail-safe automation system for plants with increased safety requirements
Complies with safety requirements up to SIL 3 according to IEC 61508 and up to Cat. 4 according to EN 954-1
Distributed fail-safe I/O modules can be connected through the integral PROFIBUS DP interface (PROFIsafe)
The fail-safe I/O modules of ET 200M can be also centrally connected
The standard modules for non-safety Applicaiton can be operated both centrally and locally

The CPU 315F-2 DP permits the design of a fail-safe automation system for plants with increased safety requirements, especially for production engineering.
Distributed I/O stations containing fail-safe I/O modules can be connected through the integrated PROFIBUS DP interface. The fail-safe I/O modules of ET 200M can also be centrally implemented safety-related.
Safety-related communication between the F CPU and the fail-safe I/O modules is performed on the basis of the PROFIsafe profile.

Mfr. Part No.	Description
6AG1315-6FF04-2AB0	SIPLUS S7-300 CPU 315F-2DP -25 ... +60 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7315-6FF04-0AB0 . FAILSAFE CPU WITH MPI INTERFACE INTEGRATED 24V DC POWER SUPPLY, 384 KB WORKING MEMORY, 40MM WIDE, 2. INTERFACE DP-MASTER/SLAVE MICRO MEMORY CARD REQUIRED

Siemens SIPLUSS7-300CPU315F-2DP CPU Unit

Inquiry

Most Searched Keywords