Siemens 6ES7138 Power Module

Manufacturer: Siemens

PM-E power modules are plugged into the TM-P terminal modules provided for the purpose.

The first module after the IM 151-3 must be a power module.

The version for fusing has a fusible link (5 x 20 mm). Up to 6 replacement fuses can be stored in the terminating module (see IM151).

More+

Features Applications Model

For monitoring and, depending on the version, fusing the load and sensor supply voltage
Can be plugged onto TM-P terminal modules with automatic coding.
Diagnostics message for voltage and blown fuse (can be switched off via configuration)
PM-E 24 V DC Standard
load voltage diagnostics
PM-E 24 V DC High Feature
load voltage and reverse voltage diagnostics
with status information
option handling (only in combination with the IM 151-1 Standard, IM 151-1 FO Standard and IM 151-1 High Feature)
24 to 48 V DC PM-E power module
load voltage diagnostics
with status information
option handling (only in combination with the IM 151-1 Standard, IM 151-1 FO Standard and IM 151-1 High Feature)
PM-E 24 V DC to 230 V AC power module
power module for universal use
with integral replaceable fuse
with status information
option handling (only in combination with the IM 151-1 Standard, IM 151-1 FO Standard and IM151-1 High Feature)

PM-E power modules are used for monitoring and, depending on the version, for fusing the load and sensor supply voltages that are fed via the TM-P terminal modules to the self-configuring voltage buses.
The failure of the voltage and/or fuse can be reported to the higher-level master if required. Additional LEDs inform on site about the status of voltage and fuse.

Mfr. Part No.	Description
6ES7138-4CA01-0AA0	ET200S, POWER MODULE PM-E, 24V DC