Siemens CPU414F CPU Unit

Manufacturer: Siemens

The safety related and standard communication between the central controller and the fail-safe ET 200 modules takes place over PROFIBUS DP and/or PROFINET. The specially developed PROFIBUS profile PROFIsafe allows the transmission of user data associated with the safety function within the standard data telegram. Additional hardware components, e.g. special safety buses, are not required. The necessary software is either integrated into the hardware components as an expansion, or reloaded into the CPU as a certified software block.

More+

Features Applications Model

For constructing a fail-safe automation system for plants with increased safety requirements
CPUs for high demands in the mid-level performance range
Applicable for plants with additional demands on programming scope and processing speed
Complies with safety requirements to SIL 3 acc. to IEC 61508 and PL e acc. to ISO 13849.1
Standard and safety-related tasks can be performed with a single CPU
Integrated PROFINET functions with CPU 414F-3 PN/DP
Multi-processor mode is possible
Safety-related communication with distributed I/O devices over PROFIBUS DP or PROFINET IO with PROFIsafe profile
Fail-safe I/O modules can be connected in a distributed manner via the integrated interfaces (DP and PN with CPU 414F-3 PN/DP) and/or through communication modules (CP 443-5 Extended and CP 443-1 Advanced)
Central and distributed use of standard modules for non-safety-oriented applications

The CPU 414F-3 PN/DP is a CPU for high demands in the mid-level performance range. They meet higher demands for program scope and instruction processing speed. It permits the design of a fail-safe automation system for plants with increased safety requirements.
The integrated PROFIBUS DP interfaces make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.
An additional DP master system can be connected via the IF 964-DP interface module.
For the PROFINET interface of the CPU 414F-3 PN/DP, the switch functionality permits the formation of two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Mfr. Part No.	Description
6ES7414-3FM06-0AB0	SIMATIC S7-400, CPU414F-3 PN/DP CENTRAL PROCESSING UNIT WITH: 4 MB WORKING MEMORY, (2 MB KB CODE, 2 MB DATA), INTERFACES: 1. IF MPI/DP 12 MBIT/S (X1), 2. IF ETHERNET/PROFINET (X5), 3. IF IF964-DP PLUGABLE (IF1)

Siemens CPU414F CPU Unit

Inquiry

Most Searched Keywords