The CM 1242-5 communication module is used to connect a SIMATIC S7-1200 to PROFIBUS as a DP slave and has the following characteristics: PROFIBUS DPV1 slave in accordance with IEC 61158
Module replacement without PG supported
Power is supplied via the backplane bus so that no extra cabling is required
Support of all standard baud rates from 9.6 Kbit/s to 12 Mbit/s
Compact industry-standard enclosure in S7-1200 design for mounting on a standard mounting rail
Fast commissioning thanks to easy configuration using STEP 7 without additional programming overhead
The CM 1242-5 is intended for use in factory automation. Low-cost PROFIBUS-based automation solutions can be created on the basis of the S7-1200 for optimal production.
The CM 1242-5 communication module is used to connect a SIMATIC S7-1200 to PROFIBUS as a DP slave and has the following characteristics: PROFIBUS DPV1 slave in accordance with IEC 61158
Module replacement without PG supported
Power is supplied via the backplane bus so that no extra cabling is required
Support of all standard baud rates from 9.6 Kbit/s to 12 Mbit/s
Compact industry-standard enclosure in S7-1200 design for mounting on a standard mounting rail
Fast commissioning thanks to easy configuration using STEP 7 without additional programming overhead
The CM 1242-5 is intended for use in factory automation. Low-cost PROFIBUS-based automation solutions can be created on the basis of the S7-1200 for optimal production.
| Mfr. Part No. | Description |
| 6GK7242-5DX30-0XE0 | CONNECTION OF SIMATIC S7-1200 TO PROFIBUS AS DP |
Phone : + 86-28-65770218
Fax : + 86-28-86129221
Email : sunny@asicedirect.com
And constantly improve our products and services to provide efficient custom automation solutions to ensure that customers get fast, professional service and support.
A solution provider in the industrial control & electronic market, providing quality automation parts.
Headquarters: 
© 2015-2022 A&S Automation.,Ltd. All Rights Reserved.
