Fanuc IC693DSM314 PLC

Manufacturer: Fanuc

The Motion Mate GE Fanuc 90-30 IC693DSM314 is a high-performance motion control module. GE Fanuc 90-30 IC693DSM314 is highly integrated with the logic solving and communications functions of the Series 90-30 PLC. In digital mode the GE Fanuc 90-30 IC693DSM314 controls GE Fanuc digital servos, while in analog mode it controls servos with an analog command input.

More+

Features Model

Digital Signal Processor (DSP) control of GE Fanuc Servos
Block Processing time under 5 milliseconds
Velocity Feed Forward and Position Error Integrator to enhance tracking accuracy
High resolution of programming units
Position: -536,870,912...+536,870,911 User Units
Velocity: 1 ... 8,388,607 User Units/sec
Acceleration: 1 … 1,073,741,823 User Units/sec/sec
Simple and powerful motion program instruction set
Simple 1- to 4-axis motion programs. Multi-axis programs using Axes 1 and 2 may utilize a synchronized block start.
Non-volatile storage for 10 programs and 40 subroutines created with VersaPro software (Version 1.1 or later).
Compatible with Series 90-30 CPUs equipped with firmware release 10.0 or later (will not work with CPUs 311 – 341 and 351).
Single point of connection for all programming and configuration tasks, including motion program creation (Motion Programs 1 C 10) and Local Logic programming. All programming and configuration is loaded through the PLC¡s programming communications port. In turn, the
CPU loads all configuration, motion programs, and Local Logic programs to the DSM314 across the PLC backplane.
User scaling of programming units (User Units) in both Standard and Follower modes.
DSM314 firmware, stored in Flash memory, is updated via its front panel COMM port.

Mfr. Part No.	Description
IC693DSM314	Digital Signal Processor (DSP) control of GE Fanuc Servos

Fanuc IC693DSM314 PLC

Inquiry

Most Searched Keywords