Siemens CM IO-Link

Manufacturer: Siemens

The standard BaseUnits of the ET 200SP are available for connection. The individual signals of the serial connection are connected with appropriate terminals.

A light BaseUnit opens a new load group. The power supply must be fed in via this BaseUnit. The first BaseUnit next to the interface module must always be a light BaseUnit.

A dark BaseUnit forwards the power supply of the adjacent light BaseUnit on the left via self-assembling voltage buses. A new infeed is therefore only required on the next light BaseUnit to the right.

All variants that correspond to BaseUnit type A0 can be used as BaseUnits.

More+

Features Applications Model

CM IO-Link communication module
Serial communication module for connecting up to 4 IO-Link devices in accordance with IO Link specification V1.0 and V1.1. The IO-Link parameters are configured using the Port Configuration Tool (PCT), version V3.0 and higher.
Supported data transfer rates
COM1 (4.8 kbit/s)
COM2 (38.4 kbit/s)
COM3 (230.4 kbit/s)
Expansion limits
Length of cable: Max. 20 m
Max. 32 bytes of input and output data per port
Max. 32 bytes of input and output data per module
Supported ET 200SP system functions
Replacement without PG with automatic backup without the engineering tool of the IO Link Device Parameter (V1.1 devices only) and the IO-Link master parameters by means of redundant saving of parameters to e-coding element
Reparameterization during operation
Identification data I&M
Firmware update
PROFIenergy
Can be plugged into Type A0 BaseUnits (BU) with automatic e-coding
LED indicators
DIAG: Operating state indicator (green/red) of the module
C1..C4: Port status indicator (green) for Port 1, 2, 3 and 4
Q1..Q4: Channel status indicator (green) for Port 1, 2, 3 and 4
F1..F4: Port fault indicator (red) for Port 1, 2, 3 and 4
PWR: Supply voltage indicator (green)
Clear labeling on front of module
Plain text identification of the module type and function class
2D matrix code (order and serial number)
Connection diagram
Color-coding of the module class CM: Silver
Hardware and firmware version
Complete Article No.
Optional accessories
Labeling strips
Reference identification label
Color-coding plate with color code CC04
Optional system-integrated shield connection

The CM IO-Link communication module enables data exchange with up to 4 external IO Link Devices via one 3-wire cable each.
Comprehensive parameterization options make it possible to adapt the controller flexibly to the communication partner.
Thanks to the compatibility of IO-Link with standard sensors, commercially available sensors in accordance with IEC 61131 Type 1 can also be operated on the IO-Link master.

Mfr. Part No.	Description
6ES7137-6BD00-0BA0	SIMATIC ET 200SP, CM 4 X IO-LINK ST COMMUNICATION MODULE IO-LINK MASTER V1.1

Siemens CM IO-Link

Inquiry

Most Searched Keywords