Reer EOS2 Safety Light Curtain

Manufacturer: Reer

Compact, Type 2 - SIL 1 and SILCL 1 - PL c - Cat. 2 Safety Light Curtain. EOS2, with its small-size housing (only 28 x 30 mm) and minimum dead zone, is ideal for the protection of any tool machine, in particular where space restrictions exist.

Allows to keep its resolution up to 30 mm if installed on a plan and up to 40 mm if installed at 90° against another EOS unit. Special versions with IP 69K watertight enclosure (WTF and WTHF), also suitable for Food & Beverage industry, available.

More+

Features Model

Safety level:Type 2 according to EN 61496-1; IEC 61496-2 *
SIL 1 according to IEC 61508
SILCL 1 according to IEC 62061
PL c – Cat. 2 according to EN ISO 13849-1.
See new safety parameters for Type 2 light curtains
Protected heights (mm): 160 ... 1810.
Response time (ms): 2,5 ... 18,5.
Autotest every 0,5 sec.
Safety outputs: 2 PNP - 400 mA at 24 VDC with short-circuit, overload, polarity reversal protection.
Signaling: LEDs for light curtain's status and diagnostic.
Power supply (VDC): 20%.
Max. cable lenght (m): 100.
Operating temperature (°C): -10 ... +55.
Protection rating: IP 65 and IP 67.
Fastening modes: back slot or to the top and lower end by rotating brackets SFB E180 (optional).
Cross section (mm): 28 x 30.

Mfr. Part No.	Description
EOS2 A	resolution 30, 40 mm for hand detection
EOS2 X	Built-in, selectable manual or automatic Start/Restart.
EOS2 XS - XM - XS2	2, 3, 4 beams for detection of the body in access control.

Reer EOS2 Safety Light Curtain

Inquiry

Most Searched Keywords