Nikki Denso NA80 Series Servo Motor

Manufacturer: Nikki Denso

Synchronous type AC servomotor NA80 series is consisted from the power range of 50W to 750W (3000 rpm). They are equipped with 17bit encoder, and it can be converted to absolute encoder. From 50W to 400W motors can be used with new multi-function servo driver VPS series, and NA80 series demonstrates its optimal performance.

More+

Features Model

When it is running at 1/5000 of the rated speed, motor may not run smoothly. When load is 100%, the speed control range become a condition of motor not to stop. When matching with NA20 series motors, speed control range will be 1:3000.
When the power-supply voltage descends, neither the declared power nor the ratings rotational speed are guaranteed.
To be changed by the power supply impedance
Please select the no fuse breaker according to the power supply capacity with enough block capacity for protection.
In regards of specifications, the mentioned values are based on the surroundings temperature 40 after our recommended heat sink is installed.
The allowable radial load value is measure by the position of 20 mm from the installation surface.
Each values are at the temperature of 20 to 30.
The value without a/the common difference is becoming an authorized value.

Mfr. Part No.	Description
NA80-05	Reted output 50w
NA80-10	Reted output 100w
Na80-20	Reted output 200w
NA80-40	Reted output 400w
NA80-60	Reted output 600w
NA80-75	Reted output 750w

Nikki Denso NA80 Series Servo Motor

Inquiry

Most Searched Keywords