Fanuc IC660BBA023 PLC

Manufacturer: Fanuc

GE Genius IC660BBA023 24/48 VDC Thermocouple Input Blocks are primarily used for monitoring temperature, with standard thermocouple types (J, K, T, E, B, R, S, and N) connected, and the IC660BBA023 can also be used for measuring low-level voltage input signals. A GE IC660BBA023 Thermocouple block has six input circuits, in three isolated groups. +/-10 V common mode voltage (maximum) allowed between 2 points in a group.

More+

Features Model

A Thermocouple block has six input circuits, in three isolated groups. +/-10 V common mode voltage (maximum) allowed between 2 points in a group. Each group has two thermocouple input circuits and two remote cold junction compensation inputs. Group to group isolation is 300 volts.
Each input can interface to type J, K, T, E, B, R, S, and N (#14 AWG Nicrosil vs. Nisil) thermocouples. The block provides cold junction compensation for all thermocouple input measurements.
Each channel can be configured to use an internal sensor, an external sensor, or a user-defined value ( in the range of +/- 327.67mV) for cold-junction compensation. An external signal from a remote junction can be either a voltage (XJV) or a current (XJI) analog of temperature. The XJV input is scaled for 1.0mV per degree Centigrade and the XJI input is scaled for 1.0uA per degree
Kelvin. After compensation, the block linearizes each thermocouple input measurement according to the NBS monograph for the thermocouple type in use.
Each input measurement can be adjusted up to +/-100.0 degrees C or +/-100.0 degrees F for greatest accuracy.
An output is provided to drive a Bus Switching Module (version IC66*BSM021 only).

Mfr. Part No.	Description
IC66BBA023	24/48 VDC Thermocouple Block

Fanuc IC660BBA023 PLC

Inquiry

Most Searched Keywords