This module provides 16 input circuits, with LED indicators, each designed to receive a single discrete (ON/OFF) signal fkom user supplied devices. Typical input devices include pushbuttons, limit switches, selector switches and relay contacts. These input circuits can interface to either 24 V ac signals or 24 V dc source-type signals, thereby allowing the module to interface to input devices that provide their own voltage. In addition, the module can be connected as a sink input. When using the sink configuration, the user must supply the source of power for the input devices, as when used in the source input configuration. Following are specifications for each of the 16 circuits.
User devices are connected to screw terminals on the removable connector mounted on the faceplate of this module. Each SCRW terminal will accept up to one No. 12 AWG wire or two No. 14 AWG wires. The On/OFF state of each circuit is indicated by an LED located in the logic side of each circuit. The 16 circuits are divided into 2 groups of 8, each with its own common. The two commons, CA and CB are isolated from each other internally. Each input can accept either an AC input or a DC input.
| Mfr. Part No. | Description |
| IC610MDL112 | Input VoMage (source or Sink), 14 to 30 v ac, 50-60 Hz |
Phone : + 86-28-65770218
Fax : + 86-28-86129221
Email : sunny@asicedirect.com
And constantly improve our products and services to provide efficient custom automation solutions to ensure that customers get fast, professional service and support.
A solution provider in the industrial control & electronic market, providing quality automation parts.
Headquarters: 
© 2015-2022 A&S Automation.,Ltd. All Rights Reserved.
